Current processing time is 2-4 weeks for all handmade products. Christmas delivery deadline: place orders by Nov. 24th
$65.00
| /
• Fi compatible endlinks attached allowing you to add your Fi tracker to this waterproof, durable and stylish collar. This listing is for one collar with attached Fi endlinks. You can charge your Fi tracker without removing the device from the collar by simply sliding the Fi charging base between the tracker and the collar webbing.
• waterproof, durable; cleans easily vegan friendly, low maintenance genuine Biothane webbing
• Solid brass Check Chain Martingale (Gold) or Stainless-Steel Check Chain(silver), D-ring, adjustable slide, loop & Chicago screws. This hardware will not rust with use in water however it should be rinsed in fresh water and thoroughly dried after a day in the elements.
• small 1/2" HHco. collar charm for added style on gold and silver hardware collars.
• 1" wide webbing in Standard weight (approx. 2mm thick).
NOTE: Brass has a natural patina when it is exposed to the elements. This is not rust but if your dog has a light color coat it could turn the fur a blueish gray. This is not permanent. It will wash out with dog shampoo. The Stainless-Steel chain does not do this as often, but it is still possible. Regular cleaning will prevent the patina from building up.
Click here for - Shipping & Processing Time Information Page
We have 'Rush My Order' available for anyone needing to expedite the production time of their order. Tracking will be provided once your order has shipped. Please see the shipping, returns, exchange and repair policy for more information.
All Harbor Hound Co. Collars & Leashes are handmade to order, and we do not offer returns or exchanges unless we make a mistake, or the item is defective. Please see our Returns Page for more information.
Each consumer is responsible for determining the suitability of these products for their individual situation. Consumer accepts all responsibility by purchasing and using these products. Harbor Hound Co. is not responsible for any and all injuries that can occur from the improper use of its products. Harbor Hound Co. recommends constant supervision when your dog is using these products.
All photos are the property of HARBOR HOUND CO.™
**This product is compatible with the Fi Smart Collars. Harbor Hound Co. does NOT sell the Fi tracking device.
Type: Waterproof Collar
Here is our complete guide to sizing for our SUMMIT+SEA & Nautical Rope Collars. Please use our contact page to email us with any questions.
Measurement A: Measure around the head at it's thickest part, this is usually around the jaw and up around the ears.
Measurement B: Measure around the neck where you want your collar to sit relaxed. Add two fingers under the tape measure for added comfort room and be sure the tape measure is not too tight.This is your neck measurement with the comfort room needed in a collar.
Measure with a soft tape measure. If you don't have a tape measure, you can also use a shoestring and measure it with a ruler/yardstick afterwards. Do NOT measure a current collar to get this collar size.
SLIP COLLAR and NON-ADJUSTABLE MARTINGALE COLLARS:
Measure A and B, as seen in the photo- For this style collar, the collar will need to be large enough to slip over the head in order to put the collar on so measurement A is necessary to ensure the collar will be large enough to use. If the head measurement is larger than the neck measurement, the collar will need to be sized according to the head measurement. As a general rule, the collar should be sized .5" - 1" larger than the largest measurement to ensure a good fit. Fluffy dogs may need more than an inch extra if their neck measurement is larger than their head measurement.
For Nautical Rope Collars, add two inches or more to the largest measurement. The ropes round shape makes it fit tighter than a flat collar of the same length therefore it will need to be sized up at least two inches. Small dog collars of 1/4" and 3/8" size rope will need to be sized up one inch instead of two inches.
SUMMIT+SEA BUCKLE COLLAR:
Measure part B in the photo, where you would want your collar to rest. This is usually close to the base of the neck but be sure you are above the shoulders. You do not want your collar resting on the shoulders. Our Buckle Style Collars are adjustable up to two inches and holes are spaced .5" apart. We recommend the collar size with your dogs neck measurement on the smaller side up to the middle hole. For Example: Your dogs neck measures 16.5". A 16-18" size collar will fit nicely. Please keep coat length/thickness in mind as fluffier dogs may need extra length to accommodate their coat. Another example: Your dog's neck measures 20", a 20-22" collar will fit nicely as well as a 19-21" collar.
OPENING CLASP NAUTICAL ROPE COLLAR:
Measure part B in the photo, where you would want your collar to rest. This is usually close to the base of the neck. This style collar is not adjustable so precise measurement is important. The round shape of the rope makes this collar fit tighter than a flat collar of the same length so it is important to size up. As a general rule, add two inches to the neck measurement for large dog 1/2" rope collars. *For small dog 1/4" & 3/8" rope collars, size up one inch instead of two inches.
SUMMIT+SEA ADJUSTABLE MARTINGALE COLLAR:
Measure A and B, as seen in the photo- For this style collar, the collar will need to be large enough to slip over the head in order to put the collar on so measurement A is necessary to ensure the collar will be large enough to do so. If the head measurement is larger than the neck measurement, the collar will need to be sized according to the head measurement. Fluffy dogs may need more than an inch extra if their neck measurement is larger than their head measurement. This style collar is adjustable using the adjustable slides on the side to cinch down the collar webbing to fit the size of the neck. Please refer to Slip Collars & Non-Adjustable Martingales above for sizing guide on non-adjustable martingale collars.
SUMMIT+SEA SIDE-RELEASE BUCKLE COLLAR:
Measure part B, as seen in the photo- As a general rule, the collar should be sized at least 1" larger than the neck measurement to ensure a good fit. For example, a dog with a 15" neck would best fit in a size 14-17" collar. Fluffy dogs may need more than an inch for comfort so please keep your dogs specific needs in mind when selecting a collar size. This style collar is completely adjustable using the adjustable slides on the side to cinch down the collar webbing to fit the size of the neck. Due to it's adjust-ability this collar is a great option for growing dogs since it can be cinched down smaller and length can be let out as the pup grows.