Current processing time is 2-4 weeks for all handmade products. Christmas delivery deadline: place orders by Nov. 24th
$25.00
| /
These endlinks CANNOT be purchased without a HHC collar. You must purchase a Harbor Hound Co. waterproof collar that the Fi endlinks will be attached to. All orders placed without a collar will be immediately cancelled.
With our design you will be able to charge your Fi without removing the Fi Device from the collar. Simply slide the base between the Fi and the webbing and position the Fi on the base until your Fi lights up to indicate that it is charging.
Our Fi Refit is an Add-On feature that can be purchased with any 1" or 1.5" wide Harbor Hound Co. waterproof collar. Our refit design is a mounted end-link design that places the end-links permanently on top of a solid constructed collar. Our original design relieves any stress or pressure placed on the Fi device or end-links, eliminating the unpredictable and hazardous separation of the brackets on the Fi device. This will prevent an unexpected escape of your beloved pup and also the potential loss of your Fi device.
Please note a few things: Our Fi refit will take up about 6" of space on your collar and works best for collars of at least 15" or longer. Not recommended for the Peak Series collars unless the neck size/collar length is 20" or larger otherwise there may not be much room left for crystals or studs to be added. Please email me if you have a special request or question regarding the Peak Design collars. I can add the refit to Slip Collars as well but the device will be placed closer to the D-ring side of the collar so that you have full Slip capability without damaging your Fi device.
QUICK ORDER LINKS to our most popular collars that include the Fi endlinks in the listing:
Fi Compatible Side-Release Collar
Fi Compatible 1" Buckle Collar
Fi Compatible 1" Rua Martingale
Fi Compatible 1.5" Rua Martingale
Fi Compatible 1.5" Layered Buckle Collar
Fi Compatible TALA studded Collar
Fi Compatible SHASTA studded Collar
I can make a refit collar that fully detaches at the end-links like Fi's original In-Line collar if you would like. Please leave a note on your order or email me to request this. I can do this for any 1" wide single layer collar.
** Harbor Hound Co. does NOT sell the Fi device. You can purchase your Fi GPS device at TryFi.com Use that link to save $50 on your Fi Smart Collar! Or use discount code "harborhound50" at checkout.
Click here for instructions on removing and attaching the Fi device to new collar bands.
Type: Upgrades
Here is our complete guide to sizing for our SUMMIT+SEA & Nautical Rope Collars. Please use our contact page to email us with any questions.
Measurement A: Measure around the head at it's thickest part, this is usually around the jaw and up around the ears.
Measurement B: Measure around the neck where you want your collar to sit relaxed. Add two fingers under the tape measure for added comfort room and be sure the tape measure is not too tight.This is your neck measurement with the comfort room needed in a collar.
Measure with a soft tape measure. If you don't have a tape measure, you can also use a shoestring and measure it with a ruler/yardstick afterwards. Do NOT measure a current collar to get this collar size.
SLIP COLLAR and NON-ADJUSTABLE MARTINGALE COLLARS:
Measure A and B, as seen in the photo- For this style collar, the collar will need to be large enough to slip over the head in order to put the collar on so measurement A is necessary to ensure the collar will be large enough to use. If the head measurement is larger than the neck measurement, the collar will need to be sized according to the head measurement. As a general rule, the collar should be sized .5" - 1" larger than the largest measurement to ensure a good fit. Fluffy dogs may need more than an inch extra if their neck measurement is larger than their head measurement.
For Nautical Rope Collars, add two inches or more to the largest measurement. The ropes round shape makes it fit tighter than a flat collar of the same length therefore it will need to be sized up at least two inches. Small dog collars of 1/4" and 3/8" size rope will need to be sized up one inch instead of two inches.
SUMMIT+SEA BUCKLE COLLAR:
Measure part B in the photo, where you would want your collar to rest. This is usually close to the base of the neck but be sure you are above the shoulders. You do not want your collar resting on the shoulders. Our Buckle Style Collars are adjustable up to two inches and holes are spaced .5" apart. We recommend the collar size with your dogs neck measurement on the smaller side up to the middle hole. For Example: Your dogs neck measures 16.5". A 16-18" size collar will fit nicely. Please keep coat length/thickness in mind as fluffier dogs may need extra length to accommodate their coat. Another example: Your dog's neck measures 20", a 20-22" collar will fit nicely as well as a 19-21" collar.
OPENING CLASP NAUTICAL ROPE COLLAR:
Measure part B in the photo, where you would want your collar to rest. This is usually close to the base of the neck. This style collar is not adjustable so precise measurement is important. The round shape of the rope makes this collar fit tighter than a flat collar of the same length so it is important to size up. As a general rule, add two inches to the neck measurement for large dog 1/2" rope collars. *For small dog 1/4" & 3/8" rope collars, size up one inch instead of two inches.
SUMMIT+SEA ADJUSTABLE MARTINGALE COLLAR:
Measure A and B, as seen in the photo- For this style collar, the collar will need to be large enough to slip over the head in order to put the collar on so measurement A is necessary to ensure the collar will be large enough to do so. If the head measurement is larger than the neck measurement, the collar will need to be sized according to the head measurement. Fluffy dogs may need more than an inch extra if their neck measurement is larger than their head measurement. This style collar is adjustable using the adjustable slides on the side to cinch down the collar webbing to fit the size of the neck. Please refer to Slip Collars & Non-Adjustable Martingales above for sizing guide on non-adjustable martingale collars.
SUMMIT+SEA SIDE-RELEASE BUCKLE COLLAR:
Measure part B, as seen in the photo- As a general rule, the collar should be sized at least 1" larger than the neck measurement to ensure a good fit. For example, a dog with a 15" neck would best fit in a size 14-17" collar. Fluffy dogs may need more than an inch for comfort so please keep your dogs specific needs in mind when selecting a collar size. This style collar is completely adjustable using the adjustable slides on the side to cinch down the collar webbing to fit the size of the neck. Due to it's adjust-ability this collar is a great option for growing dogs since it can be cinched down smaller and length can be let out as the pup grows.